Below is a honda/acura management arm with a spherical bearing mounted in a zinc plated sleeve in the entrance of the arm and yet another bearing mounted in an aluminum sleeve. The arm was on a car that was day-to-day pushed for maybe 10000 km through all temperature problems . The bearing is in wonderful shape but the sleeve,made by yet another enterprise, has corroded poorly. If you want to equipment spherical bearing sleeves you might want to slash a action soon after the snap ring so any rust ,paint or debris will not interfere with urgent the bearing out. This sleeve is machined with one diameter all the way through the bore. Or just make them out of aluminum, loctite it and not worry about this.
Post time: Nov-07-2016